19mm × 4m Nylon Web Strapping for M-Lock Fasteners

Create or replace the strap used with an M-Lock hive fastener using this 19mm × 4m Nylon Webbing from Hornsby Beekeeping Supplies.

Four metres is intended to provide enough material for one standard hive-fastener setup.

Flexible Alternative to Metal

Nylon webbing is less rigid than galvanised metallic strapping.

That can make it easier to feed around the hive, handle in the apiary and store when the strap is not in use.

Designed for M-Lock Fasteners

The webbing is sold separately from the M-Lock buckle.

If you already own a fastener and the existing strap has become worn or damaged, the webbing allows only the expendable section to be replaced.

Four-Metre Length

The supplied length is approximately 4m and the webbing is 19mm wide.

Before cutting or modifying the strap, confirm how much length your particular hive stack requires.

Check Before Hive Transport

Straps should be inspected before moving colonies.

Look for abrasion, cuts, damaged stitching or any area that could weaken under tension.

Replace worn webbing rather than relying on a questionable strap during transport.

Product Details

  • 19mm width
  • 4m length
  • Nylon webbing
  • Suitable for M-Lock fasteners
  • Flexible and easy to handle
  • Bulk quantities available

Order 19mm × 4m Web Strapping from Hornsby Beekeeping Supplies. For M-Lock buckles or metallic strap alternatives, call 02 9477 5569 or email info@hornsby-beekeeping.com.