Galvanised Vents for Migratory Hive Lids 

Add controlled ventilation openings to a new or existing migratory hive lid with Galvanised Vents for Migratory Hive Lids from Hornsby Beekeeping Supplies.

Made from solid galvanised material, these vents create openings around the lid rim so air can move through the upper area of the hive.

Four vents are generally required to prepare one complete standard migratory lid.

Controlled Ventilation Around the Lid Rim

Heat naturally rises inside the hive.

Vent openings around the upper section provide additional airflow and can support the colony as it regulates temperature during warmer conditions.

The aim is to create controlled ventilation rather than large uncontrolled gaps around the hive roof.

Ventilation is only one part of the overall hive environment, and factors such as entrance size, bottom-board design, colony strength and local conditions can also influence airflow.

Solid Galvanised Construction

Each vent is made from solid galvanised material.

Because vents are installed in an exposed part of the hive roof, the galvanised construction provides a practical component for building or repairing a traditional migratory lid.

The simple metal design allows the vent to be incorporated into new equipment or used to replace an existing component.

Four Vents Per Standard Migratory Lid

Allow approximately four vents for one standard migratory lid.

Using four distributes the openings around the lid rim rather than concentrating ventilation at one point.

If you are building several lids at once, calculate the total number of vents required before beginning so each lid can be completed during the same workshop session.

Suitable for New Builds & Repairs

Vents Lid Migratory can be used when:

  • Building a new migratory hive lid
  • Replacing a worn vent
  • Replacing a damaged vent
  • Repairing otherwise serviceable lid equipment
  • Adding the required vents during DIY lid construction

Replacing a small component can allow an otherwise functional migratory lid to remain in service rather than replacing the complete roof.

Key Features

  • Solid galvanised construction
  • Designed for migratory hive lids
  • Creates controlled upper ventilation openings
  • Four generally required per standard lid
  • Suitable for new construction
  • Suitable for repairs and replacement

Complete Your Migratory Lid Project

Whether you are building a new lid or replacing damaged ventilation components, these galvanised vents provide the purpose-designed part required for a standard migratory lid.

Order Galvanised Vents for Migratory Hive Lids from Hornsby Beekeeping Supplies today or call 02 9477 5569 for assistance with your hive-building equipment and hardware.

Although its a simple product,its well made & not

By: on 24 October 2020
Great product... I would reccomened..
(5)

More From This Category