Australian-Made Beehive Frame Wiring Board

Turn frame wiring from a juggling act into a more organised workshop process with the Australian-Made Wiring Board from Hornsby Beekeeping Supplies.

The board is designed to support a timber frame while wire is threaded and tensioned, making repetitive DIY frame preparation more manageable.

Built for Hands-On Beekeepers

The tool is particularly suitable for:

  • Hobby beekeepers
  • Sideliners
  • Small commercial producers
  • Anyone assembling significant numbers of wired frames

Once you begin preparing dozens of frames at a time, holding the timber square while simultaneously controlling a spring-wire roll becomes unnecessarily difficult.

The wiring board gives each part a defined position.

Manage the Wire More Easily

Integrated guides help the wire feed through the frame without the roll continually unwinding around the work area.

That can make the process faster and more controlled.

It also keeps attention focused on maintaining even tension rather than wrestling with loose wire.

Australian Made

The board is made in Australia and forms part of Hornsby’s practical DIY frame-preparation range.

The standard setup is particularly suited to Full Depth, WSP and Ideal frames.

Beekeepers working with other frame depths may need to confirm fit or make appropriate workshop adjustments.

Complete the Frame-Wiring System

Use the board alongside:

  • Unassembled timber frames
  • Eyelets
  • 304 stainless-steel wire
  • Eyelet tool
  • Wire crimper
  • Beeswax foundation
  • Embedding equipment

Together, these tools provide an efficient way to prepare traditional wired frames from scratch.

For a beekeeper who regularly assembles frames, the wiring board can save time every season rather than being a tool used only once.

Order the Australian-Made Beehive Frame Wiring Board from Hornsby Beekeeping Supplies. For wire, eyelets or compatible frame components, contact us on 02 9477 5569 or info@hornsby-beekeeping.com.

Video will explain the use of wiring board towards the end. Sit back and enjoy!!!

useful wiring board

By: on 11 January 2022
I used to wire frames without a board but as i've had to do dozens lately i bought this frame and it does make it easier. The little rollers mean that you can pull the wire through easily in one go, and the wire reel isn't constantly unwinding and springing around (which a hazard to your eyes). The board fits full depth frames but I have both WSP and full frames, so i had to adapt the board so it would fit both, which wasn't too difficult, just a couple of little cuts with a jigsaw.
(5)